REDWIRE Environment News

News you can use from leading suppliers

Daemar supports the green-energy sector
November 27, 2017 by Daemar Inc.

Daemar is known for providing components to a wide array of major industries, from oil and gas to agriculture and food processing. Green energy, which has become important in the modern world, is…

Realize major savings with compressed air management system
September 29, 2017 by Compair Canada Inc. div. of Gardner Denver

Energy management is crucial for all compressed air users, as the highest cost factor of a compressor is the energy to run it. However, this high cost also means that there is a…

Rosta focuses on energy efficiency with ‘green technologies’
June 14, 2017 by Rosta Inc

Rosta is committed to helping its customers meet their environmental goals. The leading manufacturer of rubber suspension, oscillating conveyor and tensioning technologies demonstrates this commitment by supplying its customers with energy-efficient products. Tensioning technology…

Manufacturer demonstrates commitment to workplace and environmental safety
December 13, 2016 by L & M Precision Products Inc

L. & M. Precision Products Inc. is committed to workplace safety. The leading Canadian producer of high-quality, precision-machined products understands that, as an employer and good corporate citizen, it is responsible for ensuring…

The key to a clean and safe workplace
September 30, 2016 by Rotem Industrial Products Inc

Manufacturers must take certain measures to ensure the safety of their workplace and employees. For metalworkers, oil mist eliminators are critical tools to support this effort. They are designed to efficiently remove oil…

Coca-Cola realizes significant savings with efficient compressed air system
September 27, 2016 by Compair Canada Inc. div. of Gardner Denver

Compressed air systems can be huge energy hogs if they don’t offer a reliable supply of high-quality air efficiently. But for CompAir customers, this is not a concern. The company's air compressors have…

CSA Group releases critical document on proper CNG tank disposal
August 9, 2016 by CSA Group

As the exploration and production of natural gas grows globally, so does the use of Compressed Natural Gas (CNG) in the automotive industry. Because of this, more and more CNG cylinders and tanks…

Portable compressors offer high efficiency and low emissions
May 19, 2016 by Compair Canada Inc. div. of Gardner Denver

When it comes to compressors, reliability and efficiency are a must, particularly in demanding applications. In high precision construction projects, the key is to find a portable solution that doesn’t compromise on quality…

Contributing to a safer workplace and environment
May 18, 2016 by L & M Precision Products Inc

As a top Canadian producer of high-quality, precision machined products, L. & M. Precision Products Inc. has a responsibility to ensure the safety of its workers and the environment — a responsibility that…

Rosta technologies give customers the power to be increase efficiencies
May 4, 2016 by Rosta Inc

Rosta, a leading manufacturer known for its blue rubber suspension, oscillating and tensioning technologies, is also known for its green technology. The company is committed to reprocessing used parts and recycling, in an…

NISCO carries heaters to meet the varied needs of its customers
April 6, 2016 by Northern Industrial Supply Co. (NISCO)

As a leading provider of heating, ventilation and air conditioning solutions, Northern Industrial Supply Company (NISCO) offers a wide selection of heaters for use in many environments. From fresh and forced air heaters…

How to ensure pump systems run at their optimal performance
April 6, 2016 by KSB Pumps Inc

Pumps that aren’t operating efficiently consume a lot of energy and, as a result, become very costly. Not only are they more expensive to run, they require more maintenance and have a shorter…

CompAir compressed air solutions offer reliability and energy efficiency
March 21, 2016 by Compair Canada Inc. div. of Gardner Denver

CompAir is the name behind many innovative compressed air solutions. With a proven track record of compressed air development that spans more than 200 years, the leading global supplier’s technologies are known for…

N.R. Murphy provides rotary air locks and duct silencers
March 17, 2016 by N.R. Murphy Limited

N.R. Murphy is known for offering a complete line of dust collectors, cyclones and fans. But the company can also provide a wide selection of quality accessories, including rotary air locks and duct…

Web-based energy management solution available from PIC
January 19, 2016 by Process Instruments and Components Inc

Carlo Gavazzi’s integrated web-based solution for energy management, VMU-C, is available in Canada from Process Instruments & Components (PIC). The VMU-C family of products consists of multiple units designed to monitor energy management. …

New harmonized standard on digester and landfill gas available from CSA Group
December 7, 2015 by CSA Group

Digester and landfill gases are widely used as fuel to produce electricity, drive pumps and fire boilers. The migration of these gasses into buildings and other confined areas can pose the risk of…

Denso sealing and moulding products offer protection
July 30, 2015 by Denso North America Inc

Denso North America’s sealing products have a proven track record of solving the most challenging problems for customers across the globe. The company’s sealing and moulding mastics are not affected by water, acid…

Aeroex mist collectors offer low maintenance and long service life
July 28, 2015 by Aeroex Technologies Inc.

Not all oil mist collectors are created equal. Aeroex, a Barrie, Ont.-based manufacturer, makes oil mist collectors designed to overcome many of the shortfalls of other technologies — a unique solution to meet the needs…

Walter offers safe, efficient and sustainable solutions
July 24, 2015 by Walter Surface Technologies

Walter Surface Technologies has a mission — to contribute to its customers’ success by helping them work better and more efficiently, improve worker health and safety conditions, protect the environment, and reduce waste…

New pump significantly reduces air consumption, offers major savings
July 24, 2015 by York Fluid Controls Ltd

York Fluid Controls now offers the latest addition to the Versa-Matic product line — the new AirVantage pump with energy-saving technology.  AirVantage is a new technology for air operated double diaphragm (AODD) pumps…

Four reasons industrial users should switch to LED
July 22, 2015 by Henkel Canada Corporation

When companies begin to employ energy-efficient technologies, they often start with the low-hanging fruit — areas that allow them to realize results with little effort. Lighting is one of those areas.  LED lights,…

University realizes major savings thanks to steam boilers
June 23, 2015 by Miura Canada Co. Ltd.

Forward-thinking companies in North America, who want to conserve oil and gas resources while saving money and reducing emissions, have embraced Miura boilers for their state-of-the-art, super efficient technology. The company has no…

Smart water softener system ensures optimized boiler operation
June 9, 2015 by Miura Canada Co. Ltd.

Miura is a leader in the development of technology that reduces oil and gas consumption and conserves natural resources. It has grown to be one of the largest industrial steam boiler manufacturers in…

Ohio Broach turning equipment into ‘green machines’
June 1, 2015 by The Ohio Broach & Machine Co.

The Ohio Broach & Machine Co. is currently investigating converting some of its machinery into “green machines.” Specifically, it is looking at converting several standard hydraulic actuated machines to mechanically actuated machines. The machines being…

Gould Fasteners and Calmark committed to environmental excellence
May 27, 2015 by Gould Fasteners Ltd

For more than 30 years, Calmark (now part of the Schroff product family) has been designing and engineering electronic packaging products and electro-mechanical assemblies. Its products include PCB enclosures, guides, card-loks, retainers, extractors, card pullers,…

Denso priming solution keeps wind turbine rebar rods corrosion-free
May 21, 2015 by Denso North America Inc

The push for alternative energy sources has been gaining momentum in recent years. Wind power is one of the alternatives that is making a difference in Canada, as Canadian hydro-producing companies harness this…

State-of-the-art boilers help maintain the health of a leading specialty hospital
May 7, 2015 by Miura Canada Co. Ltd.

Intermountain Healthcare’s The Orthopedic Specialty Hospital (TOSH), located in Murray, Utah, is one of the U.S.’s most advanced facilities for sports medicine, physical therapy and athletic training, nutrition and exercise. It’s no surprise,…

On-demand boiler systems an energy-efficient solution
March 27, 2015 by Miura Canada Co. Ltd.

When the application calls for multiple boilers, a system with on-demand performance and modular scalability is a must for companies looking for an energy-efficient solution.  Miura’s MI System, for multiple installations, may be…

Adhesive application system brings huge savings
March 18, 2015 by Adheco Ltd.

If you are looking for a business case to go green, look no further than SABA’s adhesive application system, which can reduce foam bonding adhesive costs by as much as 50 per cent.  Here’s how:…

Glass manufacturer cuts out waste
March 11, 2015 by Pegasus Glass

Pegasus Glass has a goal of zero waste. The Cambridge, Ont.-based glass manufacturer created its “ZerOwaste project” with the intent to recycle or reuse virtually everything it produces or consumes — eliminating 95…



Subscribe
Free REDWIRE e-newsletter
Post your own REDWIRE news