The top five equipment failures in the MRO industry — and what to do about themMay 4, 2015 REDWIRE is news you can use from leading suppliers. Powered by FRASERS.
Post your own REDWIRE news Subscribe
Free REDWIRE e-newsletter
Equipment failure is an unwelcome but unavoidable reality that impacts production time, order fulfillment and workplace safety. Fortunately, an analysis of past incidents can help identify the areas where failure is most likely to happen, often before a worst-case scenario results.
Here are five examples of the most common MRO challenges, and what can be done through preventive maintenance to limit their severity.
1. Threaded fastener loosening
Outside forces — i.e., vibration, torque, shock, fatigue failure, thermal expansion and contraction — can cause bolts to loosen on equipment. In many cases, such instances can be corrected or prevented with Loctite threadlockers. A few drops applied to bolts can help maintain torque and clamp load, while still allowing for easy disassembly when needed.
2. Leaks from threaded fittings
Fluid leaks, often caused by vibration and constant pressure changes, can result in a multitude of issues, from simple downtime to potential safety hazards, to time spent on cleanup from a large spill. Depending on the type of equipment, such leaks can occur from more than one place — drain plugs, oiler nipples, fittings — wherever there is air space between the threads. The Loctite line of thread sealant solutions can reduce or eliminate leaks by forming a protective barrier that moisture and oil cannot penetrate. This not only keeps equipment running, it results in less oil consumption.
Corrosion damage is not always curable with repair. It often means costly part or equipment replacement. Loctite coatings, such as our Nordbak Chemical Resistant Coating, help prevent corrosion damage and protect equipment from harmful exposure to extreme weather and temperatures, as well as from the harsh chemical environments common to many industries. Preventive care here will improve equipment reliability and longevity.
4. Abrasive wear
Wear can happen wherever equipment is exposed to chemicals or subject to intense pressure. In a pump, for instance, pump casings and impellers can become worn from abrasive slurries and solids, cavitation and chemical attack, particularly in the cutwater, ring seats, impeller vane tips and inside the volute.
Loctite Nordbak Brushable Ceramic is one of many solutions that can repair minor surface wear. For heavier surface wear, Nordbak Wearing Compound can rebuild worn areas, extending equipment life.
5. Alignment issues
Bolt misalignment, like thread loosening, is often the result of shock and vibration. Clamp load is lost when bolts are loose, which throws alignment out of configuration. Threadlockers are the answer. In this case, High Strength Threadlocker is applied to mounting bolts to secure them in place, maintain clamp load and prevent misalignment.
Henkel provides solutions for the industry’s biggest challenges. Its Loctite brand features a complete line of high-performance adhesives, sealants and dispensing/curing systems. Contact Henkel for more information.