More power with Versa-Matic high-pressure pumpsApril 22, 2015 REDWIRE is news you can use from leading suppliers. Powered by FRASERS.
Post your own REDWIRE news Subscribe
Free REDWIRE e-newsletter
Sometimes you need more power than you can get from a standard air-operated double diaphragm pump. To fill that need, Versa-Matic offers a line of high-pressure pumps that provide pressures of 200 psi or greater.
- When pressure is critical, Versa-Matic's E2HP two-inch standard flow high-pressure double diaphragm pumps provide the performance you need. The pump includes the Elima-Matic Air Valve System for non-stalling, non-icing and lube-free operation. Other features include: pressures up to 200 psi; a standard flow rate of up to 69 gpm; stainless steel construction; and parts that are interchangeable with standard Versa-Matic stainless steel pumps.
- Blagdon N25 one-inch and N50 two-inch full flow high-pressure pumps offer enhanced power when pressure and flow rate are important. The pumps achieve discharge pressures up to 238 psi using two air chambers to double the amount of air per stroke. Included in the full-flow design is an additional air chamber to provide higher flow rates with less pulsation, resulting in reduced wear on pipes and fittings. Blagdon high-pressure pumps are available in either aluminum or stainless steel, and can start at zero head pressure with no diaphragm damage and no need for a separate fill pump.
Whether you're tackling filter press feeds, mine dewatering, slurry transfer or high-pressure discharge, Versa-Matic has a high-pressure pump to fit your application. The pumps are available through York Fluid Controls, based in Brampton, Ont. Contact York Fluid Controls for details.