Elmridge Engineering Inc.
15 Allaura Blvd, Aurora, Ontario, L4G 3N2 Canada View map
www.elmridgejetapparatus.com
Contact supplier See tel #, ask question, request materials, RFQ

Thank you, the Product info has been removed. It may take up to 5 minutes. Click here to see company's products.
{{alert.msg}}

Liquid Eductors


Using Motive Liquid and Steam/Compressed Gas - ELMRIDGE Liqui-Jet Eductors & Gas-Jet Steam Siphons

Pumping Liquids Using Motive Liquids

ELMRIDGE Liqui-Jet Eductors use water or other liquids under pressure as the Motive fluid, and operate on the venturi principle to pump other liquids or slurries. The high-velocity jet of liquid from the eductor nozzle entrains the suction liquid, creating a vacuum, and causing the suction liquid to be pumped. 'TLL Series' Liqui-Jet Eductors are optimized to achieve the best combination of Suction Capacity and available Suction Lift using the least amount of Motive Liquid. 'TLLM Series' Liqui-Jet Eductors and 'TLLT Series' Liqui-Jet Eductors combine higher Motive Liquid flowrates and somewhat lower Suction capacities with higher Discharge heads. Other models are available from stock with different operating characteristics. Liqui-Jet eductors are typically available from stock in PVC, CPVC, PVDF, Polypropylene, Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel Construction. Other materials are available upon request. Threaded, Flanged, or Sanitary connections are standard.

Pumping Liquids Using Motive Steam/Compressed Gas

ELMRIDGE Gas-Jet Siphons use primarily steam as the Motive fluid, and operate on the venturi principle to pump liquids or slurries. Steam is expanded through a nozzle at high velocity, creating a vacuum, causing the suction liquid to be pumped. TGL SERIES GAS-JET SIPHONS are optimized to achieve the best combination of Suction Capacity and available Suction Lift using the least amount of Motive Steam. Gas-Jet Siphons are typically available from stock in Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel construction. Other materials are available upon request. Threaded or Flanged connections are standard.

Gas-Jet Siphons can also be used with compressed non-condensable gases (ie. Compressed air), to pump relatively very small volumes of liquids or slurries. Contact our technical staff for details.



Share
Report listing