PSC Cleaning Systems Inc., specializing in the manufacture and distribution of quality-built high pressure cleaning equipment, offers a full range of industrial-duty cold water and hot water high pressure pumping and washing systems for virtually any cleaning application. Whether your cleaning requirements call for a multi-stage pumping system or cleaning in a Class 1, Division 1, Group C & D hazardous location environment, PSC has the right selection to suit your needs.

Founded in 1969, PSC Cleaning Systems Inc specializes in the design and manufacture of high pressure pumping and cleaning equipment for use in industrial and commercial cleaning applications. Our unique ability to design and manufacture functional and reliable cleaning systems, tailored to a given application, provides for effective and efficient solutions whether your requirements are for intermittent or continuous-duty cleaning.

The PSC product range includes:

Additionally, PSC provides an extensive selection of Cat, General and Meyers piston and plunger pumps, accessories and service parts, all backed by qualified and responsive technical and sales personnel.

PRODUCT SELECTION

• ELECTRIC DRIVEN COLD WATER PRESSURE WASHERS - PORTABLE AND STATIONARY
  Available Specifications: 1000 psi to 7000 psi / 2.2 gpm to 65 gpm
• ELECTRICALLY HEATED HOT WATER PRESSURE WASHERS
  Available Specifications: 1000 psi to 4000 psi / 4 gpm to 12 gpm Available Heater Input: 24, 48, 72 & 96 kW
• EXPLOSION-PROOF COLD WATER AND HOT WATER PRESSURE WASHERS
  Class 1, Division 1, Group C & D / Class 1, Division 2
• CENTRALIZED / MULTI-STAGE PUMPING AND PRESSURE WASHING SYSTEMS
  Available Specifications: 1000 psi to 3000 psi / 12 gpm to 160 gpm
• NATURAL GAS & PROPANE FIRED HOT WATER PRESSURE WASHERS
  Available Specifications: 1000 psi to 3000 psi / 4 gpm to 18 gpm Available Heater Input: 395,000 & 790,000 BTUH

Certain cleaning operations require more than one person to be cleaning at the same time. Using single operator units at each cleaning job can be expensive and places the responsibility for care of the equipment in the operator's hands. A multi-stage cleaning system is a series of motor-pump packages connected to the same set of controls and responds to the demand for high pressure water by automatically "staging in" or starting only the number of pumps needed to meet this demand. Conversely, as the demand for water falls, the pumps "stage out" or turn off.

The high pressure water (usually between 1000 and 3000 psi) leaves the pumping unit and travels through a network of high pressure piping to the areas where cleaning is required. The termination points of the pipe are vertical drops approximately five feet from the ground and usually consist of a PSC CS-1 Cleaning Station with a quick disconnect. The CS-1 allows for the introduction of cleaning chemicals into the high pressure water stream where it is then discharged through a high pressure hose assembly with a trigger gun / wand, without effecting the overall system pressure.

The system is controlled by an automatic stop/start circuit (trigger gun activated) consisting of a flow switch wired to the pump motor control. Once the trigger gun is activated, the flow switch senses a demand for water and signals the control to start the pump motor; with hot water systems the heater is now automatically engaged.

Depending on how much piping is used in the distribution system the entire process, whether one or more trigger guns are activated, usually takes place in less than a second. A timer automatically shuts off the centralized pressure washer after 10 to 15 seconds if no high pressure water is called for, preventing excessive stops/starts with multiple gun systems.

Because the centralized system is not moved from place to place, it offers the possibility of using larger pump/motor combinations for multiple outlet applications and when used in conjunction with a heater positioned downstream of the pump, will only heat the water being called for.

Additionally, with the use of an electric heat exchanger, no flammable fuel source is required and the system can be installed anywhere. A PSC centralized cleaning system allows for higher productivity and long-term cost savings when compared to portable propane or oil-fired cleaning equipment and, more importantly, offers the flexibility demanded in today's working environment.

PSC Multi-Stage / Centralized cleaning systems are designed to fit your cleaning requirements, thus eliminating the need of having to adapt your cleaning requirements to an off-the-shelf machine.

Superior in design and performance, our electrically heated, explosion proof and multi-stage cleaning systems are used in virtually every market sector:

For further information or assistance in determining the right PSC Cleaning Systems for your application, visit our website, or contact our offices at 1-800-246-9689/905-761-1733